applied stress的例句大全

Applied stress causes plastic deformation.

外加应力引起塑性形变.

It has been found that applied stress has significant influence on pearlite transformation.

发现外加应力对珠光体转变有显著影响.

In addition, the parameter of transformation plasticity increases with applied stress.

同时, 在弹性范围内,相变塑性系数也随外加应力增加而增加.

The tp-σ ( applied stress ) relation seems to follow an exponential law.

裂纹扩展期与外加应力大体有指数关系.

The fatigue crack extended under the applied stress and led to clutch fork crack and failure.

在工作应力作用下,裂纹不断扩展,最后导致拨叉完全开裂失效.

The fracture mechanism of PVC under applied load and the cause of' stress relaxation under high speed tension load are discussed.

探讨了PVC在外加载荷作用下的断裂过程和高速拉伸的应力松驰现象的产生机制。

The variational trend of the curves for the angular dependence relation shows distinct differences in comparison to the case of the uniaxial anisotropy and exchange anisotropy parallelled if the orientation of applied stress is changed.

相比单轴各向异性与交换各向异性平行的交换偏置体系，改变外应力的方向，角度依赖关系曲线具有明显不同的变化趋势。

In this paper, multi-scale RKPM is reviewed and applied to stress concentration problems.

本文将多尺度RKPM方法应用在应力集中问题上.

Introduces the imaging logging interpretation applied in West Sichuan detrital deposit microfacies analysis, terra stress analysis and crack identification.

介绍了成像测井解释在川西碎屑岩沉积微相分析、地层应力分析、裂缝识别中的运用。

Applied rated oil pressure and the biggest oil pressure to key parts separately and analyses their deforming and stress. The result was that they meet the operating requirements. 5.

分别施加额定油压和最大油压，分析关键部件在这两种状态下的变形和应力，结果关键部件满足使用要求。

The developed model has been applied to simulate the experimental stress-strain curve of oriented PMN-0.32 PT.

为了验证模型的可靠性,用该模型模拟了铁电单晶晶向的应力 - 应变曲线.

Experiments were proceeded under low and high MFL signal s change after stress being applied.

分析了在弱磁场和强磁场下施加应力后材料的漏磁信号变化.

Compound acidifier A1 and A2 were synthetically superior to Acid Lac, and A2 was more remarkable. ③ The compound acidifier ( s) can mitigate the heat stress of layers, and can be applied as an effective antistress-additive.

复合酸化剂能缓解夏季产蛋鸡的热应激，可以作为抗应激添加剂应用。A1、A2抗热应激的效果总体上优于乳酸宝，A2尤为明显。

Starting with the nonlocal continuum theory, a new rational mechanics method is applied to study logically the cohesive stress law of ahead of a crack tip.

从非局部连续介质理论出发，采用一种新的理性力学方法对裂纹前缘内聚应力分布规律进行研究。

The finite ele-ment model ( FEM) according to the actual dimension and figure was created. We applied the finite element pro-gram ANSYS to the analysis of its stress.

对该新型挤出机的外螺杆建立了符合实际尺寸与形状的有限元模型，利用ansys有限元软件对其进行了应力分析。

Furthermore, under the same loading waveform the crack initiation life increases as the amplitude of applied stress decreases.

而且，降低正弦波加载时的应力幅值可大大提高夹杂物/基体界面疲劳裂纹的萌生寿命。

The result shows that the optimal value of filler metal thickness exists and the residual stress decreases with the applied load increasing.

结果表明，钎缝厚度存在最佳值，在一定范围内钎焊压力增大，残余应力减小。

This article has done research on the distributed situation of the welding residual stress of the rectangular pipe and magnitude of the residual stress. The research is based on the related precedential experiments and simulations. The ANSYS software is applied to conduct the simulator study.

本文对焊接矩形管焊接残余应力的大小及分布情况进行了研究，是在前人相关的试验和模拟的基础上，采用ANSYS软件进行模拟研究的。

This formula gives a theoretical basis for the calculation of applied load in bar stress severing method.

该公式为应力断料时的预荷力计算提供了理论依据。

This strain gage is successfully applied to the dynamic stress test.

该成果成功地应用于某型发动机台架涡轮转子叶片的动应力测试中.